NW Blue
  • About NW Blue
  • NDAA / 889 Certification
  • DUNNS / CAGE
  • Customer Support
  • Products
    • Herelink Blue
      • Herelink Blue Overview
      • User Guides
        • Assembly and Connection
        • How to Update Firmware
        • Pairing, RC Calibration, & Setup
        • Configure Modes & Mavlink Buttons
        • Configure Sbus Buttons & Wheel
        • Wireless Communication
        • Video and Data Sharing
        • Connecting to Mission Planner
        • Herelink Blue 1.0 Air Unit to Air Unit Instructions
        • System setting
        • Installing a custom app
        • OEM Image Setup
        • Generate a bug report
      • Herelink Blue FAQ
Powered by GitBook
On this page
  • Connecting to Mission Planner
  • *If you are connected to the Herelink Blue Hotspot WiFi.
  • Mavlink
  • *If you are connected to the same WiFi network as the Herelink Blue is.
  • To view live Herelink Blue video in Mission Planner
  1. Products
  2. Herelink Blue
  3. User Guides

Connecting to Mission Planner

PreviousVideo and Data SharingNextHerelink Blue 1.0 Air Unit to Air Unit Instructions

Last updated 2 years ago

Connecting to Mission Planner

For enabling video stream in Herelink Settings please refer

*If you are connected to the Herelink Blue Hotspot WiFi.

Mavlink

  • Open Mission Planner

  • Set the port to 'UDP' (top right)

  • Click 'Connect'

  • Enter port '14550'

*If you are connected to the same WiFi network as the Herelink Blue is.

Mavlink

  • Open Mission Planner

  • Set the port to 'UDPCL' (top right)

  • Click 'Connect'

  • Enter port '14552'

You will now have Mavlink working into Mission Planner

*This configuration applies when we connect using USB TETHER or any other interface that is not WiFi. The Mavlink traffic being Broadcast from the WIFI Access Point by default, when connecting with USB or Ethernet, it is necessary to specify IP address of HereLink Blue station so it can access the UDP port 14552.

To view live Herelink Blue video in Mission Planner

Note: Video requires Mission Planner 1.3.70 beta or above

  • Start Solex or QGC to ensure your video is working (this is required to start the streaming process)

  • Right click the HUD

  • Select 'Video'

  • Select 'Herelink Video'

  • The first time you do this Mission Planner may need to download the files required to play the video. Your device will require and internet connection to be able to do this, you may need to disconnect from the Herelink hotspot to perform this step

  • A popup window will open, enter the same IP as you did in the mavlink step and click OK

Enter the IP of the Herelink Blue controller

Find your IP
Share video Stream